5.2% of complaints about the 2000 Jaguar S-Type came in the first year, which is unremarkable for a 2000 vehicle — around the middle of the 213 model-years on record. The median complaint arrives at 5.8 yr in service. The most-reported system is power train (38 complaints), typically at 6.5 yr or about 66,000 miles.
CERTAIN AFTERMARKET FUEL FILTERS SOLD UNDER THE PUROLATOR BRAND NAME, P/N F65277, SHIPPED FROM JANUARY 16 THROUGH JUNE 2, 2006, FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. DUE TO INCORRECT DESIGN, THE QUICK CONNECTORS MAY NOT FULLY SEAT WITH THE TUBE INTERFACE, EVEN THOUGH THE PERSON MAKING THE CONNECTION MAY BELIEVE THAT THE QUICK CONNECTOR IS FULLY ATTACHED.
FAILURE OF THIS CONNECTION COULD LEAD TO FUEL SPILLAGE AND, IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.
CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FRONT SUSPENSION LOWER BALL JOINTS WERE NOT TIGHTENED TO SPECIFICATIONS WHEN THEY WERE ATTACHED TO THE LOWER CONTROL ARMS.
IF THE BALL JOINT ATTACHING NUTS ARE NOT ADEQUATELY TIGHTENED, THEY CAN LOOSEN AND ULTIMATELY, RESULT IN FRACTURE OF THE BALL JOINT STUD. IF THE BALL JOINT FRACTURES, CONTROL OF THE VEHICLE COULD BE AFFECTED, INCREASING THE RISK OF A CRASH.
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH TRW SEAT BELT BUCKLE ASSEMBLIES. THE BUCKLE BASE OF THESE SEAT BELT ASSEMBLIES WERE NOT PROPERLY HEAT TREATED AND THEREFORE DO NOT PASS THE LOAD BEARING REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES."
IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANT MAY NOT BE PROPERLY RESTRAINED.
THE OUTSIDE MIRROR ON THE DRIVER'S SIDE WAS REPLACED WITH AN ORIGINAL EQUIPMENT MIRROR FROM THE DEALER. THE REPLACEMENT MIRROR WAS CONVEX RATHER THAN FLAT, CREATING A SAFETY HAZZARD. THE MIRROR DID NOT HAVE THE "OBJECTS IN MIRROR ARE CLOSER THAN THEY APPEAR" WARNING ON IT. THERE MAY BE A BATCH OF CONVEX MIRRORS WITHOUT WARNINGS THAT CAN BE INSTALLED ON THE DRIVER'S SIDE.
CONSUMER STATES ABOUT 3 DAYS AGO HE NOTICED THAT THERE WAS A CRACKED IN WINDSHIELD, WHICH IS GROWING DAILY, ABOUT AN INCH AND A HALF PER DAY. CONSUMER STATES THAT AFTER HE TOOK THE AUTO TO THE DEALER HE WAS TOLD THAT THE CRACKED IS CALLED A STRESS CRACK. TS
AUTOMATIC POWER WINDOW FELL DOWN WHILE DRIVING. *AK THE CONSUMER STATED THE INCIDENT HAPPENED TWICE. *JB
WHEN COMING TO STOP OR MAKING A TURN OR WHEN SLOWING DOWN ENGINE WILL STALL WITHOUT A PRIOR WARNING.*AK CONSUMER STATES VEHICLE HAS BEEN IN SHOP 4 TIMES AND AFTER THE FIRST 3, THE STALLING CONTINUED, VEHICLE HAS NOT STALLED SINCE 4TH REPAIR, HOWEVER STALLING IS RANDOM AND CONSUMER CAN NOT BE SURE PROBLEM HAS BEEN FIXED. *SLC