4.7% of complaints about the 2003 Dodge RAM 2500 came in the first year, which is unremarkable for a 2003 vehicle — around the middle of the 228 model-years on record. The median complaint arrives at 8.3 yr in service. The most-reported system is steering (169 complaints), typically at 9.3 yr or about 84,000 miles.
Chrysler (FCA US LLC) is recalling certain model year 2003 Dodge Ram 1500, 2500, and 3500 trucks manufactured August 29, 2002, to July 25, 2003 to address a safety defect in the passenger side frontal air bag inflator which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. This recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. A replacement air bag may have been installed, as one example, if a
In the event of a crash necessitating deployment of the passengers frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Chrysler Group LLC (Chrysler) is recalling certain model year 2003-2008 Dodge RAM 2500 4x4 and 3500 4x4, model year 2007-2008 Dodge RAM 3500 4x2 Cab Chassis and model year 2006-2008 Dodge RAM 1500 Mega Cab 4x4 trucks manufactured February 12, 2002, through February 13, 2008. The left tie rod assembly may break.
A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2011 DODGE RAM 2500/3500 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; MODEL YEAR 2008-2011 DODGE RAM 3500 CAB CHASSIS 4X2, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; AND MODEL YEAR 2008 DODGE RAM 1500 MEGA CAB 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH AUGUST 15, 2008, BECAUSE THE LEFT TIE ROD BALL STUD MAY FRACTURE. THIS CONDITION TENDS TO OCCUR DURING LOW SPEED PARKING LOT TYPE MANEUVERS WHEN THE CUSTOMER IS MAKING A TIGHT TURN. ADDITIONALLY, MODEL YEAR 2003-2008 DODGE RAM 2500/3500 VEHICLES MAY HAV
THIS CONDITION COULD RESULT IN THE POTENTIAL LOSS OF DIRECTIONAL STABILITY IN THE LEFT HAND FRONT WHEEL, INCREASING THE RISK OF A CRASH.
FABTECH IS RECALLING CERTAIN AFTERMARKET REPLACEMENT PITMAN ARMS, P/NOS. FTS93001 AND FT44039, INSTALLED FOR USE ON CERTAIN 2003 THROUGH 2008 DODGE 2500 4WD, 3500 4WD, AND 1500 4WD MEGA CAB VEHICLES. THE PITMAN ARM CAN FRACTURE AND BREAK AWAY FROM THE STEERING BOX CAUSING TOTAL LOSS OF STEERING CONTROL.
STEERING LOSS COULD RESULT IN A VEHICLE CRASH POSSIBLY RESULTING IN PROPERTY DAMAGE, INJURY OR DEATH.
CERTAIN CURVED TEMPERED REPLACEMENT GLASS MANUFACTURED BY HANGZHOU SAFETY GLASS LTD AND SUPPLIED TO SAFELITE BY AUTO TEMP INC., IDENTIFIED AS DOT-430, AND SOLD FOR USE ON CERTAIN DOMESTIC AND FOREIGN VEHICLES MAY NOT BREAK INTO SMALL PIECES AS EXPECTED OF TEMPERED GLASS AND FAILS TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 205, "GLAZING MATERIALS."
IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANT(S) MAY BE SERIOUSLY INJURED BY SHATTERED GLASS.
CERTAIN LKI ENTERPRISES, INC., BRAND NAME SUPERLIFT SUSPENSION, PITMAN ARMS SOLD AS REPLACEMENT EQUIPMENT FOR 2003-2007 DODGE RAM 2500 AND 3500 4X4 LIGHT TRUCKS. DUE TO INADEQUATE HEAT TREATMENT DURING PRODUCTION, THE AFFECTED PITMAN ARMS MAY DEVELOP CRACKS IN THE UPPER SPLINED ATTACHMENT ATTACHMENT TO THE STEERING OUTPUT SHAFT. MOVEMENT BETWEEN THE PITMAN ARM AND THE OUTPUT SHAFT MAY DEFORM SPLINES, RESULTING IN PREMATURE WEAR AND FATIGUE FAILURE OF THE AFFECTED PITMAN ARM.
PITMAN ARM WEAR OR FAILURE MAY LEAD TO LOSS OF VEHICLE CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
ON CERTAIN PICKUP TRUCKS EQUIPPED WITH DIESEL ENGINES AND AUTOMATIC TRANSMISSIONS, IN AN ATTEMPT TO EXIT THE VEHICLE QUICKLY WITHOUT SHUTTING OFF THE ENGINE AND REMOVING THE KEY, THE DRIVER MAY INADVERTENTLY LEAVE THE AUTOMATIC TRANSMISSION SHIFT CONTROL IN INDICATED REVERSE.
THIS ERROR IS AN UNINTENDED ACTION THAT MAY RESULT IN A LACK OF TRANSMISSION PARK PAWL ENGAGEMENT AND POSSIBLY DELAYED REARWARD MOVEMENT OF THE VEHICLE.
CERTAIN HEAVY DUTY PICKUP TRUCKS, THE ALUMINUM WHEELS MAY HAVE EXCESSIVE POROSITY IN THE CENTER HUB AREA WHICH CAN CAUSE A WHEEL TO CRACK.
THIS COULD CAUSE A LOSS OF VEHICLE CONTROL AND RESULT IN A CRASH WITHOUT WARNING.
CERTAIN PICKUP TRUCKS, EQUIPPED WITH CUMMINS DIESEL ENGINES AND MANUAL TRANSMISSIONS, MAY EXPERIENCE AN ELEVATED IDLE SPEED AFTER EXTENDED CRUISE CONTROL USE.
THIS CAN RESULT IN UNINTENDED ACCELERATION AND A REDUCTION IN BRAKING EFFECTIVENESS, INCREASING THE RISK OF A CRASH.
WHILE DRIVING AT 65 MPH, VEHICLE SUDDENLY DOWN SHIFTED TO 3RD GEAR. THE VEHICLE MADE A HUGE NOISE, CAUSING ENGINE TO REV UP TO THE RED LINE. CONSUMER FILLS THIS IS VERY DANGEROUS, SOMEONE COULD BE INJURED. PLEASE PROVIDE ANY FURTHER INFORMATION. PH
CONSUMER PULLED INTO A PARKING SPACE AND PLACED THE VEHICLE IN PARK WITH ENGINE ON AND GOT OUT OF THE CAR. ABOUT 40 SECONDS LATER, HEARD A CRASH. THE VEHICLE HAD ROLLED BACKWARDS AND HIT ANOTHER MOVING CAR. TOOK TO DODGE AND THEY STATED CONSUMER WAS NOT SHIFTING PROPERLY. TS THE SHIFT LEVER STOPS BETWEEN PARK AND REVERSE AND THEN SLOWLY DISENGAGES ITSELF, RESULTING IN ROLL-A-WAY. CONSUMERS WIFE WAS PRESENT IN THE VEHICLE AT THE TIME OF THE CRASH AND IS NOW UNDER DOCTORS SUPERVISION. *JG
TRANSMISSION ON A 2003 DODGE RAM 2500 CUMMINS TURBO DIESEL HAS NO 4TH GEAR AND OVERDRIVE. *AK
WHILE DRIVING AT 15 MPH, THE INTERMEDIATE STEERING SHAFT FELL APART, THE DRIVER LOSS CONTROL OF THE VEHICLE. THE CAUSE OF THE STEERING SHAFT FAILURE WAS DUE TO THE PINCH BOLT FALLING OUT. *AK THE CONSUMER MAKING A RIGHT TURN TOWING A SMALL TRAILER WHEN THE STEERING SHAFT SEPARATED AND THE VEHICLE VEERED INTO THE DITCH. *SCC *JB